Moto E XT1022 Flash File And Tool Flash Moto E Firmware [Guide]

Moto E XT1022 Flash File And Tool Flash Moto E Firmware.

Are you facing some issues like bootloop, no network, hand on logo, invaild IMEI, auto restart on your Moto E XT1022 phone, then you need to use Moto E XT1022 flash file to flash your phone.

To resolve all the software related issue in your moto phone, use Moto E flash tool to unbrick your device. This used moto e flash firmware to install stock rom your your device. In this post, we have shown you the exact method to flash Moto E Stock Rom.

Alright, so it looks like that you are someone who is using a Moto E XT1022. Well, that might sound a little old, but there is no denying the fact that this device was one of the best and the most popular one back then. A lot of people are using this device even today. The device still holds pretty well. Anyways, this device grabbed a lot of attention from the Android Developers and the users who want to customize their Android Device. Well, it looks like you are also someone who loves customizing your Android Device.

Moto E XT1022 Flash File And Tool Flash Moto E Firmware [Guide]

Now, you might have installed a custom ROM on your Moto E or maybe tried to root it which ended up bricking your device. Well, you need not worry as we are here to help you out. Today, in this post, we would be covering on Moto E XT1022 Flash File And Tool and guide on Flashing  Moto E Firmware. Now if that sounds interesting, let us top into it. Should we?

How To Flash Moto E XT1022 Flash File With Auto Script

As we already mentioned earlier, we would cover on everything you need to know about flashing Moto E XT1022. Let us now first take a look at Download Moto E XT1022 Flash File section.

Download Moto E XT1022 Flash File

Here are the download links for all the pre-requisites:

Download Section
Box content

Moto E XT1022 Flash File [Official Stock ROM] : DOWNLOAD / MIRROR

Moto E Flash Tool Download [Unbrick.bat file] : DOWNLOAD / MIRROR

Moto E USB Drivers: DOWNLOAD

mFastboot ToolDOWNLOAD / MIRROR

Once you have downloaded the required files from above, you are all set to flash your Moto E XT1022.

Steps to flash Moto E XT1022

Here are the steps which you need to follow in order to flash your Moto E XT1022:

  • First of all, you need to make sure that you have downloaded all the above pre-requisites from above.
  • Now, you need to double-click on the MotorolaDeviceManager_2.4.5.exe file.

  • Follow the on-screen instructions to install Moto Drivers on your Windows PC.
  • Now, you need to extract the contents of Moto XT1022 flash file and mFastboot tool using any Zip compression utility software. [Make sure all files be a same folder]

  • Right-click anywhere inside the folder while pressing the Shift.
  • Now, select the Open Command Prompt Window here option from the menu.
  • Boot your Moto E XT1022 into the bootloader mode by turning off and pressing Power + Volume Down keys and connect it to your PC.
  • Now, enter the following in the command prompt window and hit the Enter key on your keyboard.

mFastboot devices

  • Once done, enter the following in the command prompt window and hit the Enter key on your keyboard.

fastboot devices

  • Now, close the Command Prompt Window.
  • Double-click on the unbrick.bat file on your Windows PC.
  • The flashing process will now begin.
  • Once completed, your device will restart automatically.
  • That’s it! You have successfully flashed your Moto E XT1022.

So that’s it guys, this was our take on how to flash stock rom on Moto E XT1022. We have also included Moto E XT1022 Flash File, Tool  and drivers. We hope that you found this post useful. Just in case, if you still have some questions, then feel free to leave them in the comments section down below.

Recommended For You

Leave a Reply

Your email address will not be published. Required fields are marked *